MCSE Boot Camp by MCSE Camp MCSE $3750,CCNA $1500
MCSE Boot Camp by MCSE Camp 98% Success Ratio           
MCSE Boot Camp by MCSE Camp Boot Camp Since 1999
      

Get Certify Get Ahead

MCSE Boot Camp Schedule Schedule  MCSE Boot Camp FAQ FAQ  MCSE Boot Camp Vibrant Why Vibrant   MCSE Boot Camp location Location                                                                                                                                                   

Leading MCSE, CCNA, CCNP Certification boot camp training provider in India, USA, UK.

 

[Contents] [Back] [<< Prev] [Next >>]

Installing TCP/IP

The rest of this book is dedicated to working with TCP/IP. It therefore seems that a logical place to start is installing the protocol.

To install TCP/IP protocol support, complete the following steps:
1.Open the Network Settings dialog box (double-click the Network icon in the Control Panel).
2.Click Add in the Protocols tab to open the Select Network Protocol dialog box.
3.Select TCP/IP Protocol in the Network Protocol list and choose OK.
4.The next prompt asks, “Do you wish to use DHCP?” If this computer will obtain its IP address from DHCP, choose Yes. If this computer will be configured with a static IP address, choose No.
5.When prompted, supply the path where Setup can locate the driver files.
6.Choose Close to exit the Network settings dialog box. After recalculating the bindings, Setup shows you a Microsoft TCP/IP Properties dialog box that will, at first, be blank.
7.If more than one adapter has been installed, select the adapter to be configured in the Adapter list. (You should configure each adapter with a valid IP address for the subnet they are on.)
8.If this computer will obtain its address configuration from DHCP for any of the network adapters, click the Obtain an IP address from a DHCP server radio button.
9.If this computer will be configured with static addresses, click the Specify an IP address radio button and complete the following fields: IP Address (Required) Subnet Mask (Required. Setup will suggest the default subnet mask appropriate for the IP address you enter.) Default Gateway
10.Choose OK and restart the computer to activate the settings.

 Vibrant Advantage :

MICROSOFT Training PartnerMCSE Camp No Prestudy
MCSE Camp Longest Duration Camp
MCSE Camp Chalk Talk TrainingRed Hat Training Partner
MCSE Camp Highest Passing Rate
MCSE Camp Bootcamp since 1999
MCSE Camp Guaranteed Certification ...

Testimonials :

MCSE Certification boot camp

The instructor taught real world experience and did not just teach us to pass the test. He knew the subject well and was encouraging. His lectures were very well delivered....

Colver Dennis, USA 

 | MCSE Boot Camp India | MCSE Camp UKMCSE CampMCSE Camp USAMCSE Camp|MCSE CampIndia InformationMCSE Camp|MCSE CampCard PaymentMCSE Camp|MCSE CampSite MapMCSE Camp|MCSE CampContactMCSE Camp|MCSE CampHomeMCSE Camp ref1 | Ref2 | RHCE | RHCT | Redhat | RHCE / RHCT | RHCE Boot Camp
© Copyright 2007 MCSE Camp