Exercise 6.4: Configuring a Second DHCP Scope

Select Certification Bootcamp :
MCSE MCSE+Security CCNA CCNP RHCE Register Course Fees Home

Schedule FAQ Why Vibrant Location

Leading MCSE, CCNA, CCNP Certification boot camp training provider in India, USA, UK.

Exercise 6.4: Configuring a Second DHCP Scope

In this exercise, you will configure a second scope of addresses.

1.	Add anther DHCP scope using the following values:

IP Address Pool

Start Address	148.53.140.0
End Address	148.53.191.255
Subnet Mask	255.255.192.0
2.	Set the lease duration for 14 days, and the name the scope “Test Subnet 2.”

There should be a number listed for each scope in the DHCP Manager. The number given is the subnet ID for the scope. This scenario used a Class B address, which is split into two subnets: 148.53.64.0 and 148.53.128.0.

3.	Set the default gateway for this scope to 148.53.128.1.

This scope will not be used immediately, therefore you will deactivate it by choosing Scope, Deactivate.

Vibrant Advantage :

No Prestudy
Longest Duration Camp
Chalk Talk Training
Highest Passing Rate
Bootcamp since 1999
Guaranteed Certification ...

Testimonials :

MCSE Certification boot camp

The instructor taught real world experience and did not just teach us to pass the test. He knew the subject well and was encouraging. His lectures were very well delivered....

Colver Dennis, USA