MCSE Boot Camp by MCSE Camp MCSE $3750,CCNA $1500
MCSE Boot Camp by MCSE Camp 98% Success Ratio           
MCSE Boot Camp by MCSE Camp Boot Camp Since 1999
      

Get Certify Get Ahead

MCSE Boot Camp Schedule Schedule  MCSE Boot Camp FAQ FAQ  MCSE Boot Camp Vibrant Why Vibrant   MCSE Boot Camp location Location                                                                                                                                                   

Leading MCSE, CCNA, CCNP Certification boot camp training provider in India, USA, UK.

 

[Contents] [Back] [<< Prev] [Next >>]

Exercise 7.2: Setting Node Types

In this exercise, you set your node type both by modifying the TCP/IP configuration and by editing the registry. (This exercise requires that you have a permanent address.)
1.Open the TCP/IP configuration dialog box (right-click Network Neighborhood, choose Properties. On the Protocols tab, double-click TCP/IP).
2.Select the WINS tab and clear the WINS entry.
3.Choose OK to close the TCP/IP Configuration dialog box and then Close to exit the Network Settings dialog box.
4.Restart your computer.
5.Start a DOS prompt and enter the command IPCONFIG /ALL. You should be set for Broadcast node.
6.Return to the WINS tab (see steps 1 and 2) and enter the IP address of your WINS server (any address will do).
7.Close the TCP/IP and Network configuration dialog boxes and restart your computer.
8.Start a DOS prompt and enter the command IPCONFIG /ALL. You NetBIOS node type should change.
9.Start the Registry Editor (Start, Run REGEDT32, OK).
10.Under HKEY_LOCAL_MACHINE, open the following keys and subkeys: SYSTEM, CurrentControlSet, Services, NetBT, Parameters.
11.NodeType is not listed in this key. Choose Edit, Add Value.
12.Enter NodeType as the name for the value and choose REG_DWORD as the type. Choose OK.
13.Enter 4 as the value. (Hex should be selected.)
14.From a command prompt, type IPCONFIG /ALL. Your node type should be Mixed.
15.Edit the value in the registry, changing NodeType to 0x2.
16.From a command prompt, type IPCONFIG /ALL. Your node type should be “Peer-Peer.”
  1. Delete the value and reset the network settings to their initial state, and then restart your computer.

 Vibrant Advantage :

MICROSOFT Training PartnerMCSE Camp No Prestudy
MCSE Camp Longest Duration Camp
MCSE Camp Chalk Talk TrainingRed Hat Training Partner
MCSE Camp Highest Passing Rate
MCSE Camp Bootcamp since 1999
MCSE Camp Guaranteed Certification ...

Testimonials :

MCSE Certification boot camp

The instructor taught real world experience and did not just teach us to pass the test. He knew the subject well and was encouraging. His lectures were very well delivered....

Colver Dennis, USA 

 | MCSE Boot Camp India | MCSE Camp UKMCSE CampMCSE Camp USAMCSE Camp|MCSE CampIndia InformationMCSE Camp|MCSE CampCard PaymentMCSE Camp|MCSE CampSite MapMCSE Camp|MCSE CampContactMCSE Camp|MCSE CampHomeMCSE Camp ref1 | Ref2 | RHCE | RHCT | Redhat | RHCE / RHCT | RHCE Boot Camp
© Copyright 2007 MCSE Camp