Exercise 9.11: Manually Configuring a WINS Client

Select Certification Bootcamp :
MCSE MCSE+Security CCNA CCNP RHCE Register Course Fees Home

Leading MCSE, CCNA, CCNP Certification boot camp training provider in India, USA, UK.

Exercise 9.11: Manually Configuring a WINS Client

With this exercise, you manually configure a TCP/IP client to be a WINS client. You configure the WINS server to be a WINS client, but the same process is used to configure other WINS clients, that is, you specify the address of the primary WINS server in the specified box and if desired, the address of a secondary WINS server in the specified box.

Prerequisites:	You have installed WINS on a Windows NT 4.0 Server.
1.	Right-click on Network Neighborhood, then, from the menu, choose Properties. (You also can access the Network Properties dialog from Control Panel, Network.)
2.	Select the Protocols tab.
3.	Select TCP/IP Protocol, then choose Properties.
4.	Select the WINS Address tab.
5.	Type the address of your WINS server in the primary WINS Server box.
6.	Choose OK, then choose Close.
7.	Reboot your computer when prompted. You have now configured your computer manually to be a WINS client.

Vibrant Advantage :

No Prestudy
Longest Duration Camp
Chalk Talk Training
Highest Passing Rate
Bootcamp since 1999
Guaranteed Certification ...

Testimonials :

MCSE Certification boot camp

The instructor taught real world experience and did not just teach us to pass the test. He knew the subject well and was encouraging. His lectures were very well delivered....

Colver Dennis, USA