MCSE Boot Camp by MCSE Camp MCSE $3750,CCNA $1500
MCSE Boot Camp by MCSE Camp 98% Success Ratio           
MCSE Boot Camp by MCSE Camp Boot Camp Since 1999      

Get Certify Get Ahead

MCSE Boot Camp Schedule Schedule  MCSE Boot Camp FAQ FAQ  MCSE Boot Camp Vibrant Why Vibrant   MCSE Boot Camp location Location                                                                                                                                                   

Leading MCSE, CCNA, CCNP Certification boot camp training provider in India, USA, UK.

 

[Contents] [Back] [<< Prev] [Next >>]

Scope Options
Each DHCP scope can have several options set that are configured on the client along with the IP address, such as default gateway and WINS server addresses. DHCP Manager includes many scope options that can be configured and sent to the DHCP clients; it should be noted that if TCP/IP configuration has been manually entered, then the options (other than IP address and subnet mask) will be ignored by the client.

Two types of DHCP scope options are available:
  • Global options, which are set for all scopes in the DHCP Manager
  • Scope options, which are set for a selected scope in the DHCP Manager
The value set in a scope option overrides a value set for the same DHCP option in a global option. Any values manually configured on the DHCP client—through the Network Control Panel applet Microsoft TCP/IP Configuration dialog box, for example— override any DHCP configured options.

The following list outlines how to view and define global options for a DHCP server.
1.Start the DHCP Manager tool.
2.Choose either Scope or Global from the DHCP Options menu.
3.Configure the DHCP options required following these steps.
 
1.From the unused Options list, select an option and click Add. The option is added to the Active Options list.
2.Choose Value, the value for the option will now be displayed.
3.You can now edit the value. There are three types of values that can be edited. Strings (such as Domain name), which you can simply enter. Hexadecimal values (such as NetBIOS node type), which you can enter. And finally IP address ranges—for these you click Edit Array and another dialog box appears allowing you to enter one or more IP addresses.
4.When all the required options are entered, click OK and exit the DHCP manager.

 Vibrant Advantage :

MICROSOFT Training PartnerMCSE Camp No Prestudy
MCSE Camp Longest Duration Camp
MCSE Camp Chalk Talk TrainingRed Hat Training Partner
MCSE Camp Highest Passing Rate
MCSE Camp Bootcamp since 1999
MCSE Camp Guaranteed Certification ...

Testimonials :

MCSE Certification boot camp

The instructor taught real world experience and did not just teach us to pass the test. He knew the subject well and was encouraging. His lectures were very well delivered....

Colver Dennis, USA 

 | MCSE Boot Camp India | MCSE Camp UKMCSE Camp| MCSE Camp USAMCSE Camp|MCSE CampIndia InformationMCSE Camp|MCSE CampCard PaymentMCSE Camp|MCSE CampSite MapMCSE Camp|MCSE CampContactMCSE Camp|MCSE CampHomeMCSE Camp |  ref1 | Ref2 | RHCE | RHCT | Redhat | RHCE / RHCT | RHCE Boot Camp
© Copyright 2007 MCSE Camp