Exercise 15.1: Exploring Performance Monitor Counters

Select Certification Bootcamp :
MCSE MCSE+Security CCNA CCNP RHCE Register Course Fees Home

Leading MCSE, CCNA, CCNP Certification boot camp training provider in India, USA, UK.

Exercise 15.1: Exploring Performance Monitor Counters

After you have installed SNMP, you may want to look at the Performance Monitor utility and notice the TCP/IP objects available for monitoring. To do this, use the following steps:

1.	Choose Start, Programs, Administrative Tools and select Performance Monitor.
2.	Click on the Edit menu and click Add to Chart.
3.	Look at the list of available TCP/IP objects.

An example exercise monitoring SNMP using one of the TCP/IP related objects is as follows:

1.	Follow the previous exercise.
2.	Select the ICMP object from the list.
3.	Click on Messages/sec in the counter box.
4.	For the Scale, set to 1 and click Add.
5.	Select another object IP.
6.	From the Counter list, click Datagrams sent/sec.
7.	Set the scale to 1 and then click Add.
8.	Select Done.
9.	Make certain you are using the chart view.
10.	Change Vertical Maximum to 10 and click OK.
11.	Go to a command prompt and ping another computer.
12.	Go back to Performance Monitor and notice what happened.
13.	There should be two messages for ICMP and one IP datagram (two ICMP messages—one request, one reply).
14.	Shut down Performance Monitor and go to the next exercise.

Vibrant Advantage :

No Prestudy
Longest Duration Camp
Chalk Talk Training
Highest Passing Rate
Bootcamp since 1999
Guaranteed Certification ...

Testimonials :

MCSE Certification boot camp

The instructor taught real world experience and did not just teach us to pass the test. He knew the subject well and was encouraging. His lectures were very well delivered....

Colver Dennis, USA