Exercise 16.7: Using TRACERT to Display the Path Used

Select Certification Bootcamp :
MCSE MCSE+Security CCNA CCNP RHCE Register Course Fees Home

Leading MCSE, CCNA, CCNP Certification boot camp training provider in India, USA, UK.

Exercise 16.7: Using TRACERT to Display the Path Used

to Establish a TCP/IP Connection

Exercise 16.7 displays the route used to establish a TCP/IP connection. You should have installed TCP/IP and have access to the Internet.

1.	Open your Web browser and connect to www.microsoft.com.
2.	From a command prompt, type tracert www.microsoft.com. Note the route used to connect to the Microsoft Web site and the number of hops used for the connection.
3.	Connect to www.microsoft.com/train_cert.
4.	From a command prompt, type tracert www.microsoft.com/train_cert. See if the path is the same as that used for the prior connection.
5.	Connect to home.microsoft.com.
6.	From a command prompt, type tracert. See if the path is different than connecting to www.microsoft.com.
7.	Try connecting to other Web sites and viewing the path to these sites.

Reconnect to some of the same sites and view the path with TRACERT. Is the path the same each time you connect?

Vibrant Advantage :

No Prestudy
Longest Duration Camp
Chalk Talk Training
Highest Passing Rate
Bootcamp since 1999
Guaranteed Certification ...

Testimonials :

MCSE Certification boot camp

The instructor taught real world experience and did not just teach us to pass the test. He knew the subject well and was encouraging. His lectures were very well delivered....

Colver Dennis, USA